Slurry Magnetic Flow Meter

Coriolis Mass Flow Meter

Coriolis Flow Meters for molasses,syrup,slurry,glucose,steam flow measurement.Buy China Coriolis meter in low price from...
Liquid Turbine Flow Meter

Liquid Turbine flow meter is a kind of low cost digital flow meter for diesel ,petrol,water,palm oil. it is for clean, l...

Flow meter for slurry

Electro-Magnetic Flow Meter sensor is manufactured according to Faradays law in which an electric voltage is induced in a conductor moving through a magnetic field. SHD-SE16 Series Slurry Magnetic Flow Meter is designed for stable flow measurement in the most difficult high-noise slurry applications; it is the most accurate and abrasion-resistant flow sensors for sludge, slurries and solids. This type mag meter is widely used in the pulp and paper, mining industries.

Slurry Flow meter Features:

It can accurately measure the speed of slurry with good stability and fast response.
It can even measure slurry with concentrations up to 50% (solid).
It has digital display, 4~20mA output, pulse output, RS485 and Hart Communication options.
Liner material: Polyurethane rubber which is suitable for pulp and slurry flow measurement.
Electrodes Material: Tungsten carbide, with excellent abrasion resistance.

Slurry flow meter Technical Specifications

Fluids: Conductive medium in slurry state, Conductivity ≥ 5μs/cm
Accuracy: ±0.5%
Slurry flow sensor size:DN10~DN2000, normal request 3”, 4”, 10 inch, 12” slurry flow meter
Medium Temperature:-25°C ~ 60 °C
Slurry flow velocity can be detected: 0.5 m/s ~ 10 m/s
Flow Direction: Forward / Reversed slurry flow measurement
Electrodes material:Tungsten carbide
Liner material:Polyurethane rubber
Process Connection :Flange, slip on flange, ASME Flange
Protection level: IP65,IP68
Output: current4-20mA,Pulse,frequency
Communication: Hart Protocol, Modbus, Profibuds DP
Environment Temperature:-20°C ~ 60 °C
Relative Humidity:5% ~90%
hazardous area Location : Zone 2 option

Slurry flow meter applications

There are mainly slurry flow meter applications , sugar/corn syrup slurry, auto seed slurry, grainy, slurry with suspended particles, abrasive slurry, abrasive drilling slurry, chemical slurry, slurry copper.,etc. SE16 series Electromagnetic flow meter can only measure parts of the slurry mentioned. For some too tough applications, such as drilling fluids, mining slurry, you may need to go for Coreolis flowmeter, Coriolis flow meter is also a perfect slurry flow meter with not cheap price cost.

Slurry flow meter price

The price of slurry flowmeter is determined by many factors. The price of slurry electromagnetic flowmeter is much more expensive than that of ordinary type mag meter, because the magnetic flow converter is suitable for slurry measurement, and the lining and electrode are all wear-resistant types. Slurry flow meters are generally inline flow meter, The larger the size, the higher the price,obviously ,12” slurry flow meter is much more expensive than 4” slurry flow meter. The price of SILVER slurry magnetic flowmeter starts at $600.
If the field application is tough, we need to buy Coriolis mass flow meter to measure the slurry flow rate. The mass flow meter is very expensive, starting from $3,000

Model Selection

Item	Code	Description
Factory Mark	SHD	Silver Automation Instruments
Meter Type	SE16	Slurry Magnetic Flow Meter
Meter Size	-XXX	Example:100=DN100,4 inch magnetic flow sensor
Electrode Material	E6	Tungsten carbide (3 electrodes)
Liner Material	L5	Polyurethane rubber
Rated Pressure	1G	GB1.6Mpa	1D	DIN PN16	1A	ANSI 150#
	2G	GB2.5Mpa	2D	DIN PN25	2A	ANSI 300#
	3G	GB4.0Mpa	3D	DIN PN40	3A	ANSI 600#
	S	Special
Working Temperature	E	<60 °C
Protection Grade	P0	IP65
	P1	IP 67
	P2	IP68 (only for remote version, sensor IP68,converter IP65)
Converter Type	0	Compact
	1	Remote (standard cable 5 meters)
Output Signal Communication	S0	4~20mA
	S1	RS-485
	S2	Hart
	S4	Pulse Output
Housing Material	H0	Carbon steel
	H1	304 SS
	H2	Special Demand
Material of Body Flange	F0	Carbon steel
	F1	304 SS
	F2	Special Demand
Power Supply	G0	220V AC (85~265V,45~63 Hz)
	G1	24V DC (18~36V）
Explosion Proof	0	Non(0 could be omitted)
	Ex	Exd eia II C T3~T6

Leave a Message Email Us

we will contact you within 24 hours.