What is flow meter for water with solids ?
Flow meter for water with solids is the slurry , pulp or mud, the flow rate measurement can be a tough job for flow meter like turbine flow meter, rotameter, positive displacement flow meter .,etc.
Silver Automation Instruments has flow meter for water with solids magnetic flow meter for slurry and for liquid contained solids.
Electromagnetic flowmeter is a contact flowmeter developed and manufactured based on Faraday's law of electromagnetic induction. Slurry magnetic flow meter consists of a sensor and a converter. Flow sensor is used to measure the volume flow of conductive liquids with conductivity≥ 5μS/cm. Users can choose electricity and lining materials according to the liquid. In addition to measuring the volume flow of general conductive liquids, they can also be used to measure strong acids and alkalis and other strongly corrosive liquids and slurry, mineral pulp, mud, paper pulp and other liquid with solids, dirty liquid, wastewater, tomato pulp, pipe apple pulp ,sludge; liquid with particles etc
Specifications for flow meters measuring liquid with solids
-
Mag meter can measure flow rate of the solids content can reach to 40%;
-
By choosing robust polyurethane rubber and tungsten carbide electrodes material for abrasive or adhesive slurry measurement;
-
Flow sensor for liquid with solids: 3/4”,1”,2 inch, 2.5 inch, 3 inch,4”,6”,8 inch ,10”, 12inch, 14 inch, 16 inch and 20” flow sensor; or dial DN25,DN50,DN80,DN100, DN150, DN200, DN300.,etc;
-
High accuracy flow meter: can reach to 0.5%
-
Flow rate measurement is not affected by fluid density, viscosity, temperature and pressure changes;
-
The measuring tube has no obstruction, no moving parts, no pressure loss, and the requirements for straight pipe sections are lower.
-
Digital display to show fluids total flow, reverse and forwarder flow.
-
Power supply: 24V DC or 220V AC power supply
-
Remote display with 10m cable or integral digital display to show liquid flow information;
-
Pressure rating: ANSI 150LB, 300LB,600LB, PN10,PN16,PN25,PN40; JIS 10K, 20K;
-
Flange connection: standard can be ANSI, Table-E, DIN, JIS ;
-
4-20mA output , RS485, MODBUS , Profibus-DP or pulse , frequency outputs options;
-
Low price starts from $ 990
Coriolis Mass flow meter measuring flow meter with solids
Coriolis Mass flow meters can also measure liquid with solid particles. It can directly measure the mass flow of slurry, and even measure and display the percentage of solid content. Nowadays, more and more people choose Coriolis mass flow meters, because the measurement is more accurate and can measure the liquid under various complicated working conditions. Coriolis mass flow meter size from 1/2”, 1”, 2”, 3”, 4”, 6 inch and 8 inches.
